产品中心

News information

推荐产品

Recommended products

  • PM-1625W

    PM-1625W

  • KT-105

    KT-105

  • PM7108

    PM7108

  • PM2890W

    PM2890W

  • GW-250

    GW-250

橡胶脱模剂 当前位置:主页 > 产品中心 > 橡胶脱模剂 >

PM2890W

作者:admin  发布时间:2019-12-01
Perma-Mold® 2890W is a high performance
mandrel lubricant. When properly applied,
this formula provides excellent lubrication
between the mandrel and the cured part,
resulting in good uniformity and easy
release. Perma-Mold® 2890W must be
applied each molding cycle.
Perma-Mold® 2890W performs well on a
variety of mandrel designs and rubber
stocks. The product is ready-to-use and
should not be mixed with other lubricants or
solvents.
Typical Properties
Appearance
Off-white fluid
Density, lbs/gal; kg/l
8.26; 0.99
Flash Point (°F)
None-to-boil
Storage Stability, unopened 12 months
Application
For best performance, the mandrel should
be cleaned prior to coating with
Perma-Mold® 2890W.
Perma-Mold® 2890W is applied by spray
gun, sponge, swab, or brush as dictated by
plant logistics. Perma-Mold® 2890W can be
applied at ambient temperatures up to a
maximum of 130°F (54°C). Optimum
coating weight will depend on specific
process requirements. Perma-Mold® 2890W
should be coated onto the mandrel prior to
hose or sleeve production
Storage
Store between 50°F-130°F (10°C-54°C).
Keep from freezing. Keep container tightly
sealed to prevent evaporation and/or
contamination. If stored in cold
temperatures, allow product to warm to room
temperature prior to use.
Handling
We believe Perma-Mold® 2890W has a low
degree of hazard when used as intended.
For more information, request a copy of
Chem-Trend's Material Safety Data Sheet.
Packaging
Perma-Mold® 2890W is available in 1-gallon
(3.8L), 5-gallon (20-liter) or 55-gallon (208-
liter) containers.
While the technical information and suggestions for use
contained herein are believed to be accurate and reliable,
nothing stated in this bulletin is to be taken as a warranty
either expressed or implied.
Perma-Mold® 2890W
Mandrel Lubricant
Further Information
Request information on our complete range of
materials: custom-formulated release agents for
polyurethane molding; tire lubes and bladder
coatings; Mono-Coat® semi-permanent release
coatings; aerosol formulations; mold cleaners and
sealers; specialized coatings and application
equipment.
上一篇:PM7108 下一篇:没有了